{"product_id":"bed-bar-accessory-panel-retrofit-kit-hmor","title":"Bed Bar Accessory Panel Retrofit Kit HMOR","description":"\u003cp\u003e\u003cstrong\u003eAlready own HMOR Bed Bars, even with factory-welded accessory brackets?\u003c\/strong\u003e Add more mounting space without replacing bars or welding. This retrofit kit lets you add a separate powder-coated steel accessory panel to compatible unused straight tube sections, including the upright portions of taller Bed Bars or the top horizontal tubing. Four bolt-on round-tube mounts are included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBundle savings:\u003c\/strong\u003e Save compared with purchasing the accessory panel and four bolt-on mounts separately.\u003c\/p\u003e\u003ch3\u003eChoose Your Panel Length\u003c\/h3\u003e\u003cp\u003eAvailable in various lengths to suit different HMOR Bed Bar layouts. Select the panel length that matches your existing system and intended mounting location.\u003c\/p\u003e\u003ch3\u003eOverall Bed Bar System Length\u003c\/h3\u003e\n\u003cp\u003eThe overall length of your HMOR Bed Bar system depends on the accessory panel configuration, the number of Bed Bars, and the mounting plate style. Accessory panels feature adjustable mounting slots, allowing the front-to-rear spacing to be shortened to accommodate different truck beds and installation preferences. Overall length is measured from the front edge of the forward Bed Bar mounting plates to the rear edge of the rearmost mounting plates.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eBed Bar configuration\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eStandard Bed Bars (4\" mounting plates)\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSoftopper Bed Bars (5\" mounting plates)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2 bars + 38\" panel\u003c\/td\u003e\n\u003ctd\u003e39.75\" to 43.75\"\u003c\/td\u003e\n\u003ctd\u003e40.75\" to 44.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2 bars + 45\" panel\u003c\/td\u003e\n\u003ctd\u003e46.75\" to 50.75\"\u003c\/td\u003e\n\u003ctd\u003e47.75\" to 51.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3 bars + two 22\" panels\u003c\/td\u003e\n\u003ctd\u003e45.75\" to 51.50\"\u003c\/td\u003e\n\u003ctd\u003e46.75\" to 52.50\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3 bars + 22\" and 25\" panels\u003c\/td\u003e\n\u003ctd\u003e48.75\" to 54.50\"\u003c\/td\u003e\n\u003ctd\u003e49.75\" to 55.50\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3 bars + two 25\" panels\u003c\/td\u003e\n\u003ctd\u003e51.75\" to 57.50\"\u003c\/td\u003e\n\u003ctd\u003e52.75\" to 58.50\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eHow the adjustment works:\u003c\/strong\u003e A two-bar, single-panel system provides up to 4\" of front-to-rear adjustment in total (2\" at each end). A three-bar, two-panel system provides up to 5.75\" in total (2\" at the front, 7\/8\" at each center-panel connection, and 2\" at the rear).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThree-bar fitment note:\u003c\/strong\u003e The two-panel examples above describe overall system geometry. This retrofit kit includes one panel and four bolt-on mounts. For two adjacent panels on the same side of a three-bar system, HMOR recommends factory-welded mounting points for consistent alignment.\u003c\/p\u003e\u003ch3\u003eKit Contents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne black powder-coated 12-gauge steel accessory panel in the selected length\u003c\/li\u003e\n\u003cli\u003eFour bolt-on round-tube accessory mounts with inserts for HMOR 1.75-inch OD Bed Bar tubing\u003c\/li\u003e\n\u003cli\u003eCompatible clamp mounting hardware and Allen wrench\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eExisting Bed Bars are not included. Choose the length based on the spacing and mounting location of your existing Bed Bar system. Contact HMOR if fitment is uncertain.\u003c\/p\u003e\u003ch3\u003eImportant Installation Notes\u003c\/h3\u003e\u003cp\u003eThis kit retrofits \u003cstrong\u003eone panel\u003c\/strong\u003e only. Bolt-on mounts extend the accessory mounting surface approximately 1\/2 to 5\/8 inch farther from the tube than factory-welded mounts. Existing welded brackets elsewhere on the rack do not prevent adding a separate panel using four bolt-on mounts. Do not mix bolt-on and factory-welded mounts on the same panel because their mounting surfaces are offset. For two adjacent panels on the same side of a three-bar system, HMOR recommends factory-welded mounts for alignment.\u003c\/p\u003e\u003cp\u003eHMOR does not publish a load rating for accessory panel assemblies using the bolt-on mounts. Not intended for recovery, tie-down, jacking, or other high-load applications.\u003c\/p\u003e","brand":"Heavy Metal Off-Road","offers":[{"title":"22 Inch","offer_id":51100200075522,"sku":"HMORBBPR02","price":121.49,"currency_code":"USD","in_stock":true},{"title":"25 Inch","offer_id":51100200108290,"sku":"HMORBBPR01","price":125.99,"currency_code":"USD","in_stock":true},{"title":"38 Inch","offer_id":51100200141058,"sku":"HMORBBPR04","price":170.99,"currency_code":"USD","in_stock":true},{"title":"45 Inch","offer_id":51100200173826,"sku":"HMORBBPR03","price":188.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/9011\/7122\/files\/HMOR-Bed-Bar-Panel-Retrofit-Kit-22in-4-Clamps.png?v=1794965658","url":"https:\/\/heavymetaloffroad.com\/products\/bed-bar-accessory-panel-retrofit-kit-hmor","provider":"Heavy Metal Off-Road","version":"1.0","type":"link"}