Yes! Click Here

All HMOR products are proudly manufactured in North Idaho, USA. We do all design, prototyping, fabricating, quality control and shipping in-house. We use our local in-town partners for powder coating. We then inspect every single component, reject what doesn’t meet our strict specs and tolerances, and use those parts to finish the goods we bring to you.

Yes! One person can assemble and install a ROCK-IT Rack in as little as 90 minutes with a single 9/16” socket. Everything necessary comes with your rack system.

These Racks are width adjustable. They can be secured to the OEM bed rails, pinch clamped to the bed skirts, directly to the top of the bed sides with some drilling, or directly to a premium roll-up style bed cover, such as Retrax or Roll ‘n Lock.

Yes! The side panels, side bars, and top runners are able to be interchanged, flipped, or swapped. Rack accessories are available as well.

HMOR Full ROCK-IT Racks have a published load rating of 1,500 lbs for evenly distributed static and smooth-motion dynamic loads. Static refers to a stationary vehicle, while dynamic refers to a vehicle in smooth motion.

The rack distributes weight through its mounting points into the supported vehicle structure. Loads must remain within both the HMOR rack rating and the vehicle manufacturer's applicable load limits.

Off-road impacts, uneven loading, improper installation, and vehicle condition can affect load forces and performance. Always inspect mounting hardware and follow the installation instructions.

Grab handles, winch mounts (you heard that right), lighting kits, bicycle mounts, and more! Check out the ROCK-IT Rack Accessories page.

Yes! One person can install a set of 3 Bed Bars in as little as 15 minutes with a single 9/16” socket. Just drop them in, space them evenly, install hardware and go.

Being vehicle specific, they are secured to the OEM bed mounted T slot rails. All T-slot hardware comes with your rack system. We also have a pinch clamp mount system for vehicles without a bed mounted T slot rail system.

Yes! Choose the options available on the specific product page. Weld-on tabs for mounting plates, LED lights, Hi-Lift jack, and dog leash are available. Powder coat is available.

No. Even the tall Bed Bars are incredibly sturdy on their own (we use 4 bolts per bar to secure to the bed.) When a roof top tent (RTT) is installed, it acts as 2 full length connecting bars securing all Bed Bars, especially when our RTT Security Clamps are used. That adds a significant amount of stability to an already stable setup. 

HMOR Bed Bars have published load ratings of 500 lbs for a two-bar set and 750 lbs for a three-bar set, for evenly distributed static and smooth-motion dynamic loads.

A two-bar system distributes loads through four mounting points, while a three-bar system uses six. Published ratings apply to properly installed complete sets, not individual bars.

Do not exceed the vehicle manufacturer's applicable load capacity. Uneven loads, severe off-road impacts, installation conditions, and vehicle condition can affect performance.

Accessory Mounting Plates for gear storage, lighting kits for visibility, RTT security clamps, no-weld accessory mounts, and more! Check out the Bed Bar Accessories page.