No-Mod Pinch Clamp Replacement Hardware Pack HMOR

The No-Mod Pinch Clamp Replacement Hardware Pack replaces missing or incorrect mounting hardware or converts a supported HMOR rack from an OEM bed-track mounting setup to HMOR's No-Mod pinch-clamp setup. ROCK-IT Bars and full ROCK-IT Racks use the same hardware configuration.

Select both rack fitment and cross-section count. Fitment choices are Standard Bed Bars, Softopper Bed Bars, and ROCK-IT Rack / ROCK-IT Bars. ROCK-IT Bars use the same mounting hardware as the full ROCK-IT Rack. Available for 2-cross-section and 3-cross-section configurations. Mounting-plate slot patterns differ between the Bed Bar families and ROCK-IT system, so the correct fitment is required.

Extends the modularity of HMOR rack systems by letting customers replace or convert mounting hardware without replacing the rack. Standard Bed Bars, Softopper Bed Bars, and the ROCK-IT system each get the correct hardware configuration, with ROCK-IT Bars sharing the same setup as the full ROCK-IT Rack.

2 Cross Sections: 4 application-specific No-Mod mounting plates, 8 bolts, 8 nuts, and 16 washers (36 pieces). 3 Cross Sections: 6 application-specific No-Mod mounting plates, 12 bolts, 12 nuts, and 24 washers (54 pieces). Each mounting plate has two slots. Contents correspond to selected fitment. Complete rack or bed bar system not included.

Install using the HMOR No-Mod pinch-clamp method for the selected rack family. Match the hardware pack to both the rack type and number of cross sections before installation.